2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 206Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 206

FINAL DRIVE FRONT BEARING CARRIER InspectionRemoval 1Elevate front of vehicle and safely support machine under the frame
or rough spotsRemove the (4) wheel nuts and remove the front wheel (see "Wheel Removal")Remove the cotter pin and loosen
the front wheel hub castle nutRemove the nut and (2) cone washers from the front wheel hub assemblyCastle Nut Cone Washers
9Remove the steering tie rod from the bearing carrier 10Remove the upper and lower ball joint pinch bolts Cotter Pin 5Remove
the (2) brake caliper mounting bolts and caliperCAUTION: Do not hang the caliper by the brake lineUse wire to hang caliper
to prevent damage to the brake line 11Using soft faced hammer, lightly tap on the bearing carrier while removing the upper