2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 207Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 207

FINAL DRIVE 13Rotate bearing by hand and check for smooth rotationVisually inspect bearing for moisture, dirt, or corrosionNOTE:
new bearingBe sure that all oil residue has been removed from each surfaceSupport the bottom of the bearing carrier housingUse
an arbor and press only on the outer race or bearing damage may occur6Apply Loctite 603TM retaining compound to the outer
circumference of the new bearing race and carefully press the new bearing into the bearing carrier housing Bearing Replacement
Bearing Removal 1Remove the outer retaining ring from the bearing carrier Apply Loctite 603TM NOTE: Use care to not allow
any of the Loctite compound to get in the bearing2Support the bearing carrier in an arbor press and remove the bearing by