2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 219Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 219

FINAL DRIVE 4Remove the cover plate assemblybearing (A) for wearInspect the thrust 6Remove the armature plateInspect the
steel-on-steel, or if the friction material is worn, the assembly must be replacedRemove the ring gear and roll cage from
the gearcase as an assembly8Remove the male output hub assemblyInspect the bearings, contact surfaces and splines for signs
of wear or damageVisually inspect the clutch plate areaIf plates are steel-on-steel, or if the friction material is worn,
the assembly must be replacedPlace shop towel over the ring gear assembly and slowly remove the roll cage and rollers from