2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 227Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 227

FINAL DRIVE ADC System Fluid Bleeding 1234Position the vehicle on level surface and allow the vehicle to sit for at least
fluid13Install the reservoir cap and diaphragm securely and wipe clean any fluid residue NOTE: Debris in the reservoir may
result in inadequate bleeding and reduced performance of the system5Begin the bleeding process by filling reservoir to the
"MAX" level with clean ADC Front Drive Fluid=Recommended ADC Fluid: Premium ADC Front Drive Fluid (PN 2876144) (Quart) 6Locate
bleeder valves found on each side of the front gearcase and remove the protective capsBleeder Valve Bleeder Valve Front Gearcase
Attach clean clear hose to one of the bleeder valvesSlowly loosen the valve (counter-clockwise) and allow fluid and trapped
air to flow from the fitting IMPORTANT: Do not allow ADC fluid in reservoir to drop below the "MIN" fill lineClose bleeder