2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 229Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 229

FINAL DRIVE NOTE: Due to extremely close tolerances and minimal wear, the bearings must be inspected visually, and by feelWhile
housingUse an arbor and press only on the outer race or bearing damage may occur6Apply Loctite 603TM retaining compound to
the outer circumference of the new bearing race and carefully press the new bearing into the bearing carrier housing Bearing
Replacement Bearing Removal 1Remove the outer retaining ring from the bearing carrier Apply Loctite 603TM Support the bearing
carrier in an arbor press and remove the bearing by pressing it out from the back sideNOTE: Use care to not allow any of
the Loctite compound to get in the bearing7Wipe the housing clean of any excess compound and install the snap ringInspect