2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 236Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 236

FINAL DRIVE 19Install and tighten the large clamp using the Axle Boot Clamp Tool (PU-48951) Inner Plunging JointBoot Replacement
its lifeBefore you remove your instrument, be sure the small end of the boot is in its correct location on the shaft21Install
and tighten the small clamp on the boot using the Axle Boot Clamp Tool (PU-48951)Remove the large end of the boot from the
plunging joint and slide the boot down the shaft Clean the grease from the face of the jointPlace the drive shaft in soft-jawed