2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 237Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 237

FINAL DRIVE IMPORTANT: Tap on inner race only! 6Make sure the circlip is still on the shaft and not left in the jointCirclip
joint is NOT recommendedThe internal components are precision fit and develop their own characteristic wear patternsIntermixing
the internal components could result in looseness, binding, andor premature failure of the jointIMPORTANT: If the grease
in the joint is obviously contaminated with water andor dirt, the joint should be replaced Boot Replacement Grease Requirements:
Grease Only Service Kits PN 135005920gPN 135004630gPN 135004750g Inner Plunging Joint Capacity: Front60gRear90g 14Fully compress
the joint and push the drive shaft firmly into the inner race15Align the circlip with the lead-in chamferThoroughly clean
the joint with an appropriate solvent and dry the joint to prevent any residual solvent from being left in the joint upon
reassemblyVisually inspect the joint for damageReplace if needed10Clean the splines on the end of the shaft and apply light