2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 238Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 238

FINAL DRIVE 17Pull on the joint to test that the circlip is seated and that the joint is securely fastened to the shaft18Remove
SHAFT Spring Ring Plunging Joint Gear Side Boot Kit Grease Capacity 80 Grams Wheel Side Boot Kit Axle Boot Clamp Tool PU-48951
21Pull out on the drive shaft to center the joint in the housingSlide straight O-ring pick or small slotted screw driver
between the large end of the boot and the joint housing and lift up to equalize the air pressure in the boot22Position the
boot lip in its grooveInstall and tighten the large clamp using the Axle Boot Clamp Tool (PU-48951)Grease Capacity 90 Grams