2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 244Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 244

FINAL DRIVE 13Install the seals into the case halves using standard seal installer or other suitable methodSeal depth should
the seal into the main gearcase half using standard seal installer or other suitable methodPress seal into the gearcase until
it bottoms out in the housing Thoroughly clean the gearcase mating surfaces and be sure the alignment pins are in placeApply
Crankcase Sealant (PN 2871557) to mating surfacesInstall the gearcase cover onto the main gearcase halfInstall the cover
screws and torque to specification Cover Screw Torque: 15-20 ftlbs(20-27 Nm) 8Proceed to "Gearcase Installation" before installing