2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 270Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 270

STEERINGSUSPENSION BALL JOINT SERVICE Removal IMPORTANT: Do not reuse ball joint if it has been removed for any reasonIf
damaging the Aarm23Remove the retaining ring from the ball jointA driver must be used for the removal of the ball jointUse
the dimensions below to fabricate or locate the correct size driver to use in the following processDriver Dimensions 1.375
in(3.49 cm) in(7.62 cm) 1.75 in(4.45 cm) Press out of the A-arm in this direction Upper A-arm Shown Place driver HERE to
support A-arm - Outside diameter of driver cannot be any larger than 1.75 in(4.45 cm)- Inside diameter cannot be any smaller
than 1.375 in(3.49 cm)- Driver must be at least in(7.62 cm) tall Installation 1Place the A-arm in the correct position for