2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 284Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 284

BRAKES HAND BRAKE MASTER CYLINDER Removal 1Clean master cylinder and reservoir assemblyMake sure you have clean work area
proceduresCheck all connections for leaks and repair if necessary Brake fluid will damage finished surfacesDo not allow brake
fluid to come in contact with finished surfaces34Remove the Torx screws from the master cylinder clampHold master cylinder
upright and lift the master cylinder from the handlebarsCover brake line orifice to avoid spilling fluid Brake Switch Replacement
12Set the parking brake lock and locate the brake switch behind the hand brake leverUsing small screwdriver or similar tool,
push up on the mounting tabs through the holes on the bottom side while rotating the switch to disengage the tabs from the
holesBrake Switch Master Cylinder Disassembly The hand master cylinder is serviceable componentPolaris offers number of service
kits to rebuild this style of master cylinderRefer to the Polaris Electronic Parts Catalog Installation NOTE: Use only OEM
parts that were designed for the model ATV being servicedThere are different hand master cylinders for the different Polaris