2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 286Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 286

BRAKES BRAKE PADS Pad Removal 12Loosen the (4) wheel nutsElevate and support the side of the ATV in which the caliper brake
Thickness Service Limit: .040" (1 mm) Pad Installation 1Remove Caliper 5Push mounting bracket inward and slip the outer brake
pad past the edge of the pinRemove the inner brake padLubricate mounting bracket pins and external slide pin O-ring with
light film of Polaris Premium All Season Grease (PN 2871423)Compress mounting bracketInstall pads with friction material
facing each other If the brake pads are contaminated with grease, oil, or liquid soaked do not use the padsUse only new clean