2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 287Get this manual

2009 Polaris Sportsman 850 XP EFI EPS Service Manual, Page 287

BRAKES 3Install the caliper and torque new mounting bolts to specification CALIPER SERVICE Caliper Removal 1Loosen the (4)
has been built upMaintain at least 12, (12.7 mm) of brake fluid in the reservoir to prevent air from entering the brake systemVerify
fluid level in reservoir is at specified level inside reservoir and install reservoir capInstall the wheel(s) and wheel nutsTorque
wheel nuts to specification 56Remove (2) caliper mounting bolts and remove the caliper assembly from the bearing carrier
Wheel Nuts: Steel Wheels: 45 ftlbs(61 Nm) Aluminum Wheels: 75 ftlbs(102 Nm) Caliper Disassembly 1Push mounting bracket inward
and slip the outer brake pad past the edge of the pinRemove the inner brake pad Brake Burnishing Procedure It is required
that burnishing procedure be performed after installation of new brake pads to extend service life and reduce noiseStart