2010 Polaris Sportsman 850 Service Manual, Page 31Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 31

MAINTENANCE Front Gearcase ADC Fluid NOTE: It is important to follow the front gearcase maintenance intervals described in
Valve Front Gearcase Attach clean clear hose to one of the bleeder valvesSlowly loosen the valve (counter-clockwise) and
allow fluid and trapped air to flow from the fitting If fluid level is below the minimum mark on the reservoir, remove the
cap and add the recommended fluidReinstall the cap and front rack assembly IMPORTANT: Do not allow ADC fluid in reservoir
to drop below the "MIN" fill lineClose bleeder valve before the fluid level drops below the "MIN" fill lineRefilling an empty
reservoir will result in air pockets becoming trapped9Close the valve when clean (bubble-free) fluid begins to flow from
the valve Front Gearcase ADC Fluid Change: 1234Position the vehicle on level surface and allow the vehicle to sit for at
least 30 minutesThoroughly clean the areas around the ADC reservoir and bleeder valvesRemove the reservoir cap and diaphragm
assemblyMake sure the fluid inside the reservoir is free of debrisIf any debris is found, use clean shop towel or suction