2010 Polaris Sportsman 850 Service Manual, Page 92Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 92

COOLING SYSTEM WATER PUMP SERVICE Water Pump Impeller Removal NOTE: The water pump impeller, mechanical seal, drive coupler,
of the engineSlide the spring clamp back and remove the coolant inlet hose from the water pump housing6Remove the coolant
by-pass hose from the water pump cover fittingRemove the (10) cover screws (A) and pump cover (B) Coolant Inlet Hose Shown
with engine removed for claritySlowly drain the coolant into the drain panDispose of used coolant properly8 Remove gasket,