2010 Polaris Sportsman 850 Service Manual, Page 120Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 120

ENGINE 8Remove the high tension leads from the engine and remove the (2) nuts from each exhaust flange at the engine12Disconnect
line from the valve cover breatherBreather Line Ignition Coil 14Remove the (2) screws from the rear portion of the air box,
disconnect the intake boot from the intake plenum and remove the air box from the vehicle11Using an mm Allen socket, remove
the (4) bolts and upper right-hand frame support to allow engine removalTorque bolts to: 36 ftlbs(49 Nm) 15Depressurize the
fuel system at the fuel valveDisconnect the fuel line fitting from the fuel rail and remove the fuel tank (see Chapter "Fuel