2010 Polaris Sportsman 850 Service Manual, Page 163Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 163

TRANSMISSION Transmission Disassembly 12Remove the drive belt, drive clutch and driven clutch (see Chapter "PVT SYSTEM SERVICEDisassembly")Remove
cover 83Remove (2) retaining bolts from the transmission cover (see Step 7)These are thread forming bolts that can be used
to hold the coupler during removal and installationThread the (2) bolts into the transmission case pin holes to hold the
couplerCoupler Carefully lift up on the coverUse soft-faced hammer to tap on the input shaft and rear output shaft to ease