2010 Polaris Sportsman 850 Service Manual, Page 171Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 171

TRANSMISSION 26Install the transmission coupler and cone washer (dome facing up)27Apply LoctiteTM 2760 to the shaft threads
inner PVT cover and transmission case using wire brushClean both surfaces thoroughly in preparation for assembly31Inspect
the inner PVT coverReplace if cracked or damagedThe mating surface must be clean to ensure adhesion of new silicone sealant32Be
sure to "flame treat" the inner PVT cover prior to applying silicone to ensure good adhesionPass the flame of propane torch
back and forth quickly over the area where the silicone is to be applied (2-3 inches from the flame tip is recommended)Do
not hold the torch too close to the surfaceKeep the torch moving to prevent damage34Install the cover and torque the inner