2010 Polaris Sportsman 850 Service Manual, Page 183Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 183

CLUTCHING (PVT) 10Loosen the clamps, remove the push rivet and remove the PVT outlet duct from the inner PVT cover PVT Disassembly
PVT cover to the transmission case and remove the cover Remove the tail light bulbs from the tail lamps, disconnect the tail
light harnesses from the rear cab, and remove the rear cab to allow access to the PVT system for disassembly2Inner PVT Cover
13Remove the old silicone material from the inner PVT cover and transmission case using wire brushClean both surfaces thoroughly
in preparation for assembly3Remove the rear skid plate, outer PVT cover and drive beltRefer to "Belt Removal (TOURING Models)"Loosen