2010 Polaris Sportsman 850 Service Manual, Page 185Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 185

CLUTCHING (PVT) PVT Assembly (XP Models) 1Inspect the inner PVT coverReplace if cracked or damagedThe mating surface must
Driven Clutch Retaining Bolt: 13 ftlbs(18 Nm) 9Clean end of taper on crankshaft and the taper bore inside drive clutch using
tapered reamer3 10Install the drive clutch, bushing, washer, lock washer, and the left-hand threaded retaining boltTorque
retaining bolt to specification Drive Clutch Retaining Bolt: 47 ftlbs(64 Nm) 11Install drive belt noting direction of rotation
if the belt is being reusedRefer to "Belt Installation (XP Models)", steps 1-312Install the PVT outlet duct and align it
with the inner PVT coverInstall the push rivet and tighten the hose clampsPush Rivet Install the cover and torque the inner
PVT cover screws to specification Inner PVT Cover Screws: 6-8 ftlbs(8-11 Nm) 567Wipe away any excess silicone sealantClean