2010 Polaris Sportsman 850 Service Manual, Page 188Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 188

CLUTCHING (PVT) DRIVE BELT Belt Removal (XP Models) 1234Position the vehicle on level surface and place the transmission
tool PN 2877408 into the driven clutch as shown (tool included with vehicle's tool kit)2877408 Moveable Sheave NOTE: Make
sure the tool is square with the moveable sheave surface of the driven clutch10Rotate the tool towards the clutch to open
the sheaves56Remove the seatRemove the (11) screws retaining the PVT cover Frame Support 11Walk the belt out of the driven
clutch and drive clutch, and remove it from the vehicleIMPORTANT: Leave the Belt Removal Tool installed for belt installation