2010 Polaris Sportsman 850 Service Manual, Page 193Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 193

CLUTCHING (PVT) Clutch Disassembly 1Using permanent marker, mark the cover, spider, and moveable and stationary sheaves for
with Teflon coatingWear is determined by the amount of Teflon remaining on the bushing Remove and inspect the clutch springSee
"Drive Clutch Spring Specifications" for spring inspection Spider Removal 12Remove the limiter spacer from the shaftInstall
clutch in holding fixture (PN 2871358-A)NOTE: This updated holding fixture is required to fit the new drive clutch with curved
rib design 342871358-A Loosen the spider (clockwise) using Clutch Spider Removal Tool (PN 2870341) IMPORTANT: The clutch
shaft has left-hand threadsBe sure to turn the Spider Removal Tool in clockwise direction to remove Cover Bushing Inspection: