2010 Polaris Sportsman 850 Service Manual, Page 194Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 194

CLUTCHING (PVT) NOTE: It is important that the same number and thickness of washers are reinstalled beneath the spider during
are separatingBushing must fit tightly in rollerUse the Roller Pin Tool (PN 2870910) to replace rollers and pinsTake care
not to damage roller bushing or bearing surface of the new pin during installation Moveable Sheave Bushing Inspection 4Inspect
the TeflonTM coating on the moveable sheave bushingRubber backed buttons can be used in all clutches if the hollow roller
pin is changed to the solid roller pin NOTE: The rubber side of the button is positioned toward the solid roller pinTeflonTM