2010 Polaris Sportsman 850 Service Manual, Page 196Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 196

CLUTCHING (PVT) Clutch Inspection NOTE: Remove cover, spring, and spider following instructions for drive clutch removal,
worn or damaged = In mmShaft Diameter: Standard: 1.37451.375 (34.9134.93 mm) Service Limit: 1.373" (34.87 mm) = In mmThrust
Washer Thickness Standard: .030" (.76 mm) Service Limit: .025" (.64 mm) 34Remove the moveable clutch sheaveLift bearing (3)
and thrust washer (4) off shaftReplace as an assembly if worn, damaged, or if problems were noted3 Visually inspect PTFE
thrust washer for damageMeasure the thickness and compare to specificationReplace if worn or damaged = In mmPTFE Washer Thickness