2010 Polaris Sportsman 850 Service Manual, Page 199Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 199

CLUTCHING (PVT) Cover Bushing Removal 1Install main adapter (Item 8) on pullerRemoval Tool (3) Nut (C) Clutch Assembly NOTE:
freeRemove nut from puller rod and set asideRemove bushing and bushing removal tool from pullerDiscard bushingPiston Pin
Puller Install moveable sheave onto fixed sheaveInstall spider spacersUse same quantity and thickness as were removed Cover
Bushing Installation 123456Apply Loctite 609 evenly to bushing bore in cover Working from inside of cover, insert new bushing
and bushing installation tool into center of clutch coverWith main adapter on puller, insert cover onto puller rod, placing
outside of cover toward viseInstall nut on rod and hand tightenTurn puller barrel to apply more tension if neededTurn clutch
cover counterclockwise on puller rod until bushing is seatedRemove nut from puller rodTake installation tool and clutch cover