2010 Polaris Sportsman 850 Service Manual, Page 204Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 204

CLUTCHING (PVT) Clutch Bushing Removal 12345Install main puller adapter (Item 8) onto pullerInstall adapter reducer (Item
and sheave comes freeRemove nut (C) (left hand thread) from puller rod and set asideRemove adapters from puller6789 Apply
Loctite 609 evenly to bushing bore inside moveable sheaveInstall sheave face down on pullerInstall new bushing on installation
tool (Item 2) and install assembly into sheaveInstall left hand thread nut (C) onto puller rod and hand tighten against installation
toolTurn clutch sheave counterclockwise, making sure bushing is drawn straight into boreContinue until bushing is seatedRemove