2010 Polaris Sportsman 850 Service Manual, Page 214Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 214

FINAL DRIVE FRONT BEARING CARRIER InspectionRemoval 1Elevate front of vehicle and safely support machine under the frame
binding or rough spotsRemove the (4) wheel nuts and remove the front wheel (see "Wheel Removal")Remove the cotter pin and
loosen the front wheel hub castle nutRemove the nut and (2) cone washers from the front wheel hub assemblyCastle Nut Cone
Washers 9 Remove the steering tie rod from the bearing carrier 10Remove the upper and lower ball joint pinch bolts Cotter
Pin 5Remove the (2) brake caliper mounting bolts and caliperCAUTION: Do not hang the caliper by the brake lineUse wire to
hang caliper to prevent damage to the brake line 11Using soft faced hammer, lightly tap on the bearing carrier while removing