2010 Polaris Sportsman 850 Service Manual, Page 218Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 218

FINAL DRIVE 678Remove the upper ball joint pinch boltUsing soft faced hammer, lightly tap on the upper A-arm to remove it
front gearcaseAlign the splines of the drive shaft with the front gearcase and reinstall the drive shaftUse rubber mallet
to tap on the outboard end of the drive shaft if necessaryInstall the drive shaft into the front bearing carrierRefer to
the "FRONT BEARING CARRIERInstallation" procedure within this chapter to properly reassemble the vehicle 10Refer to the "DRIVE