2010 Polaris Sportsman 850 Service Manual, Page 233Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 233

FINAL DRIVE NOTE: Rotate the ring gear to align the ring gear grooves with the output hub clutch pack basket during installation11Install
Verify armature plate tabs are in the slots on roll cage and are resting in the ring gear grooves12Install the female output
hub assembly into the roll cagering gear assemblyGroove Cover Plate Screws: 7-11 ftlbs(9-15 Nm) 16Install the piston pump
assembly with new O-ringsTorque the screws to specification Pump Assembly Screws: 15 inlbs(1.7 Nm) 7-11 ftlbs(9-15 Nm) Removed
from gearcase for clarity Armature Plate 15 inlbs(1.7 Nm) NOTE: Rotate the output hub to align the clutch pack basket with
the grooves in the ring gear during installation13Install the large O-ring onto the cover plate and small Oring onto the