2010 Polaris Sportsman 850 Service Manual, Page 241Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 241

FINAL DRIVE NOTE: Due to extremely close tolerances and minimal wear, the bearings must be inspected visually, and by feelWhile
housingCAUTION Use an arbor and press only on the outer race or bearing damage may occur6Apply Loctite 603TM retaining compound
to the outer circumference of the new bearing race and carefully press the new bearing into the bearing carrier housing Bearing
Replacement Bearing Removal 1Remove the outer retaining ring from the bearing carrier Apply Loctite 603TM Support the bearing
carrier in an arbor press and remove the bearing by pressing it out from the back sideNOTE: Use care to not allow any of