2010 Polaris Sportsman 850 Service Manual, Page 250Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 250

FINAL DRIVE 17Pull on the joint to test that the circlip is seated and that the joint is securely fastened to the shaft18Remove
Side Boot Kit XP Models Axle Boot Clamp Tool: PU-48951 or TOURING Models CV Boot Clamp Pliers: 8700226 21Pull out on the
drive shaft to center the joint in the housingSlide straight O-ring pick or small slotted screw driver between the large
end of the boot and the joint housing and lift up to equalize the air pressure in the boot22Position the boot lip in its
grooveInstall and tighten the large clamp using the Axle Boot Clamp Tool (PU-48951) or CV Boot Clamp Pliers (8700226) CV
Joint REAR SHAFT Spring Ring Plunging Joint Grease Capacity 90 Grams Gear Side Boot Kit Grease Capacity 90 Grams Wheel Side