2010 Polaris Sportsman 850 Service Manual, Page 252Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 252

FINAL DRIVE REAR GEARCASE Gearcase Removal (XP Models) 1234Position the vehicle on level surface and remove the seatDrain
the vehicle as an assemblySlide the shaft towards the transmission and pivot the propshaft downSlide the propshaft off the
transmission output shaft and out from the vehicleRemove the drive belt, drive clutch and driven clutchRefer to Chapter "PVT
SYSTEM SERVICEPVT Disassembly (XP Models)"Remove the top retaining nut from each stabilizer bar linkage rod and rotate the
stabilizer bar out of the way12Remove the through-bolt fastener retaining the right rear upper A-arm to the bearing carrierPivot