2010 Polaris Sportsman 850 Service Manual, Page 260Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 260

FINAL DRIVE Gearcase Installation (XP Models) 12Place the gearcase in the frame as shown by starting the lower portion firstUsing
PVT cover as damage to the cover will occur3Continue to position the gearcase back into the frame until the top portion clears
the frameNOTE: Use the longer bolts (150 mm) in the top and the shorter bolts (125 mm) in the bottom Gearcase Mounting Fasteners:
40 ftlbs(54 Nm) 8Install the right rear drive shaft into the gearcase and the upper A-arm onto the bearing carrierTorque
the bearing carrier through-bolt fastener to specification 4Position the gearcase in the frame and align the mounting holes
of the gearcase to those in the frameRear Upper A-arm to Bearing Carrier: 40 ftlbs(54 Nm) 9Install the left rear drive shaft