2010 Polaris Sportsman 850 Service Manual, Page 261Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 261

FINAL DRIVE 10Install the rear upper shock through-boltsTorque bolts to specification16Install the outer PVT cover, lower
of fill plug hole threads See Chapter "Maintenance" Stabilizer Bar Linkage Retaining Nuts: 17 ftlbs(23 Nm) 12Install the
propshaft coupler onto the rear gearcase pinion shaft splinesInstall the lock washer and retaining nutNOTE: Orientate the
lock washer as shown with the tooth surfaces contacting the nut and couplerNut Cam Surface Tooth Surface Coupler DrainFill
Plug: 10-14 ftlbs(14-19 Nm) 13Lock the brake lever and torque the propshaft coupler retaining nut to specification Coupler
Retaining Nut: 90-110 ftlbs(122-149 Nm) 14Install the rear propshaft and torque bolts to specification Rear Propshaft Bolts: