2010 Polaris Sportsman 850 Service Manual, Page 262Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 262

FINAL DRIVE Gearcase Installation (TOURING Models) 1Install the rear gearcase by reversing the "Gearcase Removal" procedure
and torque the propshaft coupler retaining nut to specification Coupler Retaining Nut: 90-110 ftlbs(122-149 Nm) 9Install
the rear propshaft and torque bolts to specification Rear Upper A-arm to Bearing Carrier: 40 ftlbs(54 Nm) 4Install the left
rear drive shaft and suspension assemblyTorque the upper and lower A-arms to specification Rear Propshaft Bolts: 18 ftlbs(24
Nm) 10Install the rear wheels and torque wheel nuts to specification (see Page 8.2)11Add Polaris ATV Angle Drive Fluid to
the rear gearcase (see Chapter 2)Torque drain and fill plugs to specification Rear UpperLower A-arms to Frame: 45 ftlbs(61
Nm) 5Install the rear upper shock through-boltsTorque bolts to specification Rear Upper Shock Bolts: 37 ftlbs(50 Nm) 6Install
the rear stabilizer bar onto the linkage rodsTorque the linkage retaining nuts to specification=Rear Gearcase Capacity: 7.1