2010 Polaris Sportsman 850 Service Manual, Page 276Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 276

STEERINGSUSPENSION GENERAL SPECIFICATIONS Torque Specifications Item Aluminum Wheels Steel Wheels Wheel Hub Retaining Nuts
Nm) 45 ftlbs(61 Nm) 3Remove the handlebar assembly from the steering post HANDLEBAR RemovalReplacement 1Remove the upper
and lower headlight pods from the handlebar bracket (see Chapter 9) IMPORTANT: Take note of all vent line, wire harness and
throttle cable routing for reassembly purposes2Remove the (4) fasteners retaining the handlebar bracket and block to the
steering post IMPORTANT: Take care not to bend the throttle cable or brake line while the handlebar is removed4If replacing
the handlebar: Remove the RH and LH controls Remove the hand grips Pry open the upper and lower handlebar blocks and remove
them from the handlebar CAUTION Locking nuts, and bolts with pre-applied locking agent should be replaced if removedThe self-locking