2010 Polaris Sportsman 850 Service Manual, Page 297Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 297

STEERINGSUSPENSION Linkage RemovalInstallation 1Remove the upper linkage bushing from each sideUsing an 516" open-end wrench,
fastener from the right rear shock and swing the shock out from the frame Stabilizer Bar RemovalInstallation 1Elevate the
rear of vehicle and safely support machine under the frame area CAUTION Serious injury may result if machine tips or fallsBe
sure machine is secure before beginning this service procedureAlways wear eye protection2Remove the upper linkage bushing
from each side and rotate the stabilizer bar upCarefully remove the stabilizer bar from the frame Inspect the stabilizer
bar for straightnessInspect the bushings and replace if needed Inspect the rubber bushings on the stabilizer linkage(s) and