2010 Polaris Sportsman 850 Service Manual, Page 310Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 310

BRAKES HAND BRAKE MASTER CYLINDER Removal 1Clean master cylinder and reservoir assemblyMake sure you have clean work area
fluid to come in contact with finished surfaces34Remove the Torx screws from the master cylinder clampHold master cylinder
upright and lift the master cylinder from the handlebarsCover brake line orifice to avoid spilling fluid Fill reservoir with
DOT brake fluid (PN 2872189)Follow brake bleeding proceduresCheck all connections for leaks and repair if necessary Brake
Switch Replacement 12Set the parking brake lock and locate the brake switch behind the hand brake leverUsing small screwdriver
or similar tool, push up on the mounting tabs through the holes on the bottom side while rotating the switch to disengage
the tabs from the holesBrake Switch Master Cylinder Disassembly The hand master cylinder is serviceable componentPolaris
offers number of service kits to rebuild this style of master cylinderRefer to the Polaris Electronic Parts Catalog Installation
NOTE: Use only OEM parts that were designed for the model ATV being servicedThere are different hand master cylinders for