2010 Polaris Sportsman 850 Service Manual, Page 311Get this manual

2010 Polaris Sportsman 850 Service Manual, Page 311

BRAKES FOOT BRAKE MASTER CYLINDER Operation Overview When the brake pedal is applied it contacts the piston of the foot brake
to specification Brake Line Banjo Bolts: 15 ftlbs(20 Nm) 6Bleed the master cylinder following the procedure outlined in the
"Brake Bleeding" section of this chapter Brake Pedal RemovalInstallation 123Remove the RH mud guard and footwell (see Chapter
9)Remove the through-bolt retaining the brake pedal to the mount bracketRemove the bolt, bushings, spacer, spring and brake
lever Foot Master Cylinder RemovalInstallation 12Remove the RH mud guard and footwell (see Chapter 9)Remove the front and
rear brake line from the master cylinderUse suitable container to catch the brake fluidDispose of brake fluid properly Inspect