2011 Polaris Ranger RZR ATV Service Manual, Page 24Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 24

MAINTENANCE GENERAL VEHICLE INSPECTION AND MAINTENANCE Pre-RideDaily Inspection Perform the following pre-ride inspection
out of the mount to move the upper jam nutUpper Jam Nut 2Shift Cable Dust Boot 1Locate the shift cable in the rear LH wheel
well areaClevis Pin Shift Cable Mount Inspect shift cable, clevis pin, pivot bushings, and dust bootReplace if worn or damaged
Lower Jam Nut Adjust the shift cable so there is the same amount of cable travel when shifting slightly past the detents
of HIGH (H) gear and PARK (P)Thread the upper or lower jam nut as required to obtain proper cable adjustment Frame, Nuts,
Bolts, and Fasteners Periodically inspect the torque of all fasteners in accordance with the maintenance scheduleCheck that
all cotter pins are in placeRefer to specific fastener torques listed in each chapter5 Shift Cable InspectionAdjustment Shift
cable adjustment may be necessary if symptoms include: No AWD or gear position display on instrument cluster Ratcheting noise