2011 Polaris Ranger RZR ATV Service Manual, Page 27Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 27

MAINTENANCE NOTE: While adjusting, lightly move the throttle pedal in and out789Re-tighten the jam nut after final adjustment
should be inspected using the following procedure: Removal 12The air box is located just above the left rear wheel in the
wheel well areaUnlatch the (3) clips and remove the air box capInspect the sealIt should adhere tightly to the cover and
seal all the way aroundAir Box Cap NOTE: Service more frequently if vehicle is operated in wet conditions or at high throttle
operation for extended periodsInstallation 12Clean the air box thoroughlyPlace the filter ring over the end of the filter
NOTE: Apply small amount of general purpose grease to the sealing edges of the filter and the air box cap seal before installingApply
Grease 3434Remove the air filter assemblyInspect the air filter element and replace if necessaryDo not attempt to clean the
air filter with anything other that low pressure compressed air Install the filter into the air box and be sure it fits tightlyInstall