2011 Polaris Ranger RZR ATV Service Manual, Page 33Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 33

MAINTENANCE Main GearcaseLubricant Level Check: The fill plug is located on the side of the gearcase just below the shift
holeMaintain the fluid level at the bottom of the fill plug hole when filling the Main GearcaseDo not overfill13Reinstall
the filllevel plug and torque to 40-50 ftlbs(54-68 Nm)14Check for leaksDiscard the used lubricant properly If fluid level
is not at fill plug hole, add the recommended fluid as neededReinstall the filllevel plug and torque to 40-50 ftlbs(54-68
Nm) Transmission Lubricant Change: The lubricant change procedure is relatively the same for the main gearcase and the transfer
caseTo minimize confusion, perform the lubricant change on only one gearcase at timeAccess the drain plugs through the drain
holes in the skid plateTransfer Case Lubricant Change: 1234Remove the fill plug and the level check plug (refer to "Transfer
CaseLubricant Level Check")Place drain pan under the transfer case drain plugRemove the drain plug and allow to drain completelyClean