2011 Polaris Ranger RZR ATV Service Manual, Page 36Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 36

MAINTENANCE COOLING SYSTEM Cooling System Overview The engine coolant level is controlled, or maintained, by the recovery
is evident, allow system to cool completely and check coolant level in the radiator and inspect for signs of trapped air
in system Never remove the pressure cap when the engine is warm or hotEscaping steam can cause severe burnsThe engine must
be cool before removing the pressure capRemove the pressure capUsing funnel, add coolant to the top of the filler neckReinstall
the pressure cap NOTE: Use of non-standard pressure cap will not allow the recovery system to function properly78Remove recovery
bottle cap and add coolant using funnelFill recovery bottle to MAX level with Polaris 6040 premix Anti FreezeCoolant or 5050
or 6040 mixture of antifreeze and distilled water as required for freeze protection in your areaReinstall the recovery bottle
cap Coolant Level Inspection The pressure cap and recovery bottle are located under the front hood of the vehicleThe coolant