2011 Polaris Ranger RZR ATV Service Manual, Page 38Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 38

MAINTENANCE Radiator Removal 123Remove the front bumper (see Chapter 5)Remove the upper engine outlet hose and recovery hose
AsmRecovery Hose NOTE: Do not lubricate the stud or the lug nut Wheel Removal 12Inserts Position the vehicle on level surfacePlace
the transmission in PARK (P) and stop the engineLoosen the wheel nuts slightlyIf wheel hub removal is required, remove the
cotter pin and loosen the hub nut slightlyElevate the appropriate side of the vehicle by placing suitable stand under the
frameRemove the wheel nuts and remove the wheelIf hub removal is required, remove the hub nut and washers 3Radiator T-Fitting
Engine Outlet Hose 4Screws 56Grommets Engine Inlet Hose Wheel Installation 123Verify the transmission is still in PARK (P)Install
the wheel hub, washers, and hub nut, if previously removedPlace the wheel in the correct position on the wheel hubBe sure