2011 Polaris Ranger RZR ATV Service Manual, Page 43Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 43

MAINTENANCE Tie Rod EndWheel Hub Inspection To check for play in the ti rod end, grasp the steering tie rod, pull in all
important the height of both marks be equally positioned to get an accurate measurement34Measure the distance between the
marks and record the measurementCall this measurement "A"Rotate the tires 180 by moving the vehicle forwardPosition chalk
marks facing rearward, even with the hub axle center lineAgain measure the distance between the marks and recordCall this
measurement "B"Subtract measurement "B" from measurement "A"The difference between measurements "A" and "B" is the vehicle
toe alignmentThe recommended vehicle toe tolerance is 18", to 14", (.3 to .6 cm) toe outThis means the measurement at the
front of the tire (A) is 18", to 14", (.3 to .6 cm) wider than the measurement at the rear (B)= In mm If abnormal movement
is deected, inspect the hub and wheel assembly to determine the cause (loose wheel nuts or loose front hub nut) Refer to