2011 Polaris Ranger RZR ATV Service Manual, Page 48Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 48

MAINTENANCE BRAKE SYSTEM Brake Fluid Inspection Always check the brake pedal travel and inspect the brake fluid reservoir
few seconds and check for fluid leakage around the master cylinder fittings and the brake caliper fittings456Check surface
condition of the brake discsMeasure the thickness of the front and rear brake discsThe disc(s) should be replaced if thickness
is less than .170" (4.32 mm)Measure Brake Disc Thickness Measure Pad Material Thickness Brake PadDisc Inspection 123Check
the brake pads for wear, damage, or loosenessInspect the brake pad wear surface for excessive wearPads should be changed
when the friction material is worn to .040" (1 mm) Service Limit: .040" (1 mm) Maximum Minimum Rear Disc Front Disc Master
Cylinder Service Limit: .170" (4.32 mm) Brake Hose and Fitting Inspection Check brake system hoses and fittings for cracks,
deterioration, abrasion, and leaksTighten any loose fittings and replace any worn or damaged parts 99231422011 RANGER RZRRZRRZR