2011 Polaris Ranger RZR ATV Service Manual, Page 66Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 66

ENGINE Engine Removal Because of its design configuration and fastener torque requirements, Polaris recommends removing the
S: Remove the (2) fasteners from the rear seat base (as shown above) RZR 4: Remove the (2) fasteners and seat latch plunger
(A)Slide the rear seat base to the left and remove it Always wear safety glasses and proper shop clothing when performing
the procedures in this manualFailing to do so may lead to possible injury or death1234If vehicle was recently operated, allow
it to cool down before attempting to perform any workClean work areaThoroughly clean the engine and chassisDrain appropriate
lubricant(s): If servicing the engine, drain engine oil If servicing the transmission,drain the lubricant from the main gearcase
and transfer case If servicing the rear earcase, drain the gearcase lubricant567Remove the driver's seat (see Chapter 5)Disconnect