2011 Polaris Ranger RZR ATV Service Manual, Page 67Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 67

ENGINE 11Remove the (2) push rivets and remove the intake box from the vehicleIMPORTANT: Mark or note which ignition coil
attachedRemove Push Rivets 12Elevate the rear of the vehicle off the ground using suitable ATV lift and remove both rear
wheels13Remove all exhaust components from vehicle and engine14Loosen the hose clamp attaching the outlet duct to the PVT
coverLeave the duct attached to the upper frame supportIgnition Coil PVT Duct 19Remove the rear stabilizer bar from the linkage
on both sides of the vehicleStandard RZR Shown Frame Support Outlet Duct PVT Cover 15Remove the (8) screws that retain the
PVT cover and remove cover16Remove the high tension leads from the spark plugs and disconnect the ignition coil harness Harness