2011 Polaris Ranger RZR ATV Service Manual, Page 68Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 68

ENGINE 20Remove the (4) fasteners retaining the stabilizer bar and bracket and remove the assembly from the vehicleStandard
injector harnesses to identify MAG and PTO harness connections to aid during reassemblyDisconnect the fuel injector harnessesNOTE:
The fuel injector harness connector and locking spring is bonded to the fuel injectors with an epoxy mixDO NOT attempt to
disconnect the connector from the fuel injectorsDamage will occur to the injector andor harness if attempting to separate
at that locationSeparate the fuel injector from the vehicle by disconnecting at the end of the harness as shownFuel Injector
Disconnect Here Harness 23Disconnect the T-MAP, IAC and TPS sensor connectors from throttle body DO NOT Disconnect Here IMPORTANT: