2011 Polaris Ranger RZR ATV Service Manual, Page 89Get this manual

2011 Polaris Ranger RZR ATV Service Manual, Page 89

ENGINE 2Remove the nut (C), washer (D) and water pump impeller (E)Remove part of the water pump seal behind the impeller5Remove
the gearstator housing bolts and remove the gear stator housing cover (J) and gasket from the crankcaseBe sure to catch the
excess oil from the crankcase Do not thread the puller bolts into the flywheel more than 14, or stator coils may be damagedNote